Where to Buy Glasfloss Air Filters? [Comprehensive Answer] - CGAA.org (2023)

FAQs

Are glasfloss filters good? ›

It's clear that Glasfloss ac filters are a cut above the average both in performance and price; however, for people with respiratory concerns or those living in areas with poor air quality, this high performance is surely worth the cost.

These Filters Can Be Left In For Approximately 6 Months. They Are Sold In A Case Of 2 Which Will Give You A 1 Year Supply.

Glasfloss 21-1/2 x 23-5/16 x 1 Air Filters (Case of 6), MERV 10, Pleated, Made in USA.

The Glasfloss Z-Line® Series MR-11 filters achieve a MERV 11 rating per the ANSI/ASHRAE 52.2 Test Standard.

Where is Glasfloss Industries 's headquarters? Glasfloss Industries is located in Desoto, Texas, United States .

Expensive air filters are made of better-quality materials than cheap air filters. They are often made of fiberglass, which is a porous material that can trap more dust and pollen than other materials like cardboard or paper. Fiberglass also resists moisture and does not tear as easily as other materials.

Generally, a MERV rating between 6-13 meets the needs of most residences. This range offers a good balance between air filtration, air flow and affordability. If you select an air filter with a MERV 13 rating, it can last up to six months before needing to be replaced.

A home with no pets, smoke, or allergies will do just fine with a MERV value of 1-7. If you have pets or someone in your home has significant allergy problems, you may want to consider a higher MERV value, between 8-10.

Expensive air filters are made from higher-quality materials, last longer, are more efficient at trapping particles, and have a larger surface area to filter. This can lead to better indoor air quality and improved health.

Is MERV 11 too much? ›

In most cases, a MERV 11 air filter isn't too high for residential use. Generally speaking, anything under a MERV 13 air filter should provide very efficient air purification in a home without impacting airflow.

In general, the best MERV rating for a home is somewhere between 8-10. These filters will capture a large portion of the airborne particles and improve indoor air quality without making your energy costs rise significantly.

What kind of filter should I use in my home HVAC system to help protect my family from COVID-19? Minimum Efficiency Reporting Values, or MERV, reports a filter's ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses.

The Glasfloss GDS Disposable Panel Filters Utilize A Double Skin, Progressively Dense Fiberglass To Maximize Dust Holding Capacity.

"At K&N, we're proud to be an American-made company, and our commitment to quality, craftsmanship, and innovation is reflected in every product that comes out of our new Grand Prairie facility," said CEO Randy Bays.

All of our filters are made in the USA, UL listed, designed to maximize particulate capture rate, minimize pressure drop, and help extend the life of HVAC equipment.

HEPA Filters

Though they are the most expensive on the market, they last longer and keep your air cleaner.

Most engine air filters will cost between $20 to $85, depending on the year, make, and model of your vehicle, and whether you do it yourself or take your vehicle to the dealer or a mechanic.

All filters will restrict the air flow to some extent because, in every case, the air has to move through the filter for the unit to be able to remove the particles in the atmosphere. The higher the MERV rating, the denser the filter is going to be, and so the more restricted air flow will become.

MERV 13 filters are more efficient at removing large particles from the air, while HEPA filters are more efficient at removing small particles from the air. MERV 13 filters can remove up to 99.97% of particles from the air, while HEPA filters can remove up to 99.99% of particles from the air.

Does brand matter for air filters? ›

The brand of the filter doesn't necessarily matter, it's finding a filter that removes the most pollutants (MERV rating) from the air AND one that allows your HVAC system to perform efficiently. Here are some common misconceptions about air filters to help further educate you on their importance.

If the MERV rating on your furnace is too high, it may force your furnace to work too hard and leave it vulnerable to damages. In addition, you may not get the air velocity required to reach all parts of your home leaving inconsistencies in temperature.

MERV 5-8 Filters: MERV ratings of 5 to 8 indicate a medium-quality filter that's sufficient for most homes. They trap particles as small as 3 microns, which include mold spores, animal dander, and the highly allergenic droppings of dust mites.

The disadvantage of the highest MERV rated filters is that they typically have a higher pressure drop. This means that the air flow through the filter is reduced, which can lead to decreased air quality. Additionally, filters with a higher MERV rating are not as effective at cleaning the air as low MERV filters are.

Similar to the previous MERV filters, it is often recommended to replace MERV 8 filters every 90 days.

MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units. If you are wondering what MERV to try, keep these recommendations in mind; ASHRAE recommends MERV 6 or higher. US Department of Energy recommends MERV 13.

MERV 8 filters are sufficient for most homes. These filters are capable of trapping particles that exist in the average home, such as dust, pollen, and hairspray. MERV 8 filters allow good airflow and are not taxing on residential HVAC systems.

Sprinkle baking soda on the filter before rinsing to remove odors. Rinse the filter and let dry. Replace the filter and enjoy cool, clean air.

CR's take: The Filtrete 1900 Maximum Allergen Reduction filter is impressive at removing dust, pollen, and smoke from the air when the HVAC system is running on its highest fan speed, earning an Excellent rating in that test. But at the lowest speed, the filter is only average at removing those same airborne particles.

Generic air filters will usually be the least efficient you can purchase, and this is for a good reason. The least expensive units typically will filter at a 20% to 50% efficiency rate.

Will MERV 11 damage my HVAC? ›

Air filters with higher ratings can also have negative effects on HVAC components. The MERV 11 air filter is a safe option for residential use, and it usually does not cause restricted airflow.

MERV 8 filters aren't the best choice for residential HVAC systems, according the ASHRAE. Though MERV 8 is known to be effective at filtering out contaminants such as pollen, dust mites, sawdust, mold spores, and lint from the air, higher MERV ratings will clean the air even further.

A MERV 11 rated filter captures 85% or better of particles between the sizes of 0.3 and 10 microns. This may not seem like a significant difference compared to the MERV 8 filter, but a MERV 11 is also more capable of capturing between 65% and 79% of smaller particles.

Most homes are best served by a filter with a MERV rating of 8 to 13, but refer to your system's user manual or with a Trane employee for guidance.

A residential system will not accept filters with MERV ratings greater than 12 unless it has previously been retrofitted for a higher-efficiency filter.

MERV 11 furnace filters have a particle arrestance of a little over 90%. In comparison, MERV 13 HVAC filters have a particle arrestance of around 98%. Naturally, it is significantly more efficient. MERV 11 rated air filters are ideal for those who live in a moderately polluted area, have mild allergies, or own a pet.

Filters with a rating of 13 can efficiently capture bacteria, mold spores, pet dander, smoke, vehicle fumes, viruses, and other micro allergens that are 1 millimeter or larger. This level of filtration can help in the prevention of harmful illnesses and allergic reactions.

Cheap air filters don't last as long, are less efficient at trapping particles, and have a smaller surface area to filter. This can lead to poor indoor air quality and increased health risks.

A side benefit of a good furnace air filter is improved IAQ, which means your whole family breathes easier. Good air filters can stop biological contaminants, pet dander, dirt, mold spores and other pollutants. Cheap air filters can stop the largest particles only (sand and grit, hair, dust bunnies).

While fiberglass air filters will do the job in the most basic way, in most cases, pleated air filters are much better. They can filter out smaller particles – important for people with airborne sensitivities. They are less likely to clog in a short amount of time, and they can last up to 90 days.

What is the difference between silver and gold air filters? ›

The higher the number the more filtering the filter is. Gold is 11, silver is 8. One can probably assume that the higher the number, if the filter surface is the same, the faster it will fill up and need replacement. A higher MERV number means smaller particles are trapped.

Fiberglass filters have a very low MERV rating between 2-3 efficiency. A MERV rating (Minimum Efficiency Reporting Value) is the standard rating system for measuring an air filter's overall effectiveness at trapping air pollutants.

Most engine air filters will cost between $20 to $85, depending on the year, make, and model of your vehicle, and whether you do it yourself or take your vehicle to the dealer or a mechanic.

Yes, in general, the more expensive air filters are more effective, but a single person with no pets and allergies might not need as much filtration as a family of five with three pets and a child with asthma. Also, consider how long your air filter will last.

In general, the best MERV rating for a home is somewhere between 8-10. These filters will capture a large portion of the airborne particles and improve indoor air quality without making your energy costs rise significantly.

More expensive air filters such as Pleated Residential filters will filter out dust mites, pollen, pet dander, mold, and even bacteria, which can be worth the extra money, especially for those with severe allergies.

The higher the MERV rating, the more efficient the filter. The American Society of Heating, Refrigeration and Air Conditioner Engineers (ASHARE) recommends a MERV 6 or higher. Most people go with a MERV 8 filter.

Yes, generally you can use off-brand or aftermarket oil and air filters on your lawn care equipment without any issues. While it is always recommended to use OEM parts when possible, it is unlikely that using off-label oil and air filters will cause you any issues.

Stiffer builds for steadfast seal: 1-inch filters have less material to control, which means the frames are thinner. Thin frames have flimsy seals which let through unfiltered air, defeating the purpose of your filter. 5-inch frames are thicker and fit into the furnace more seamlessly.